Custom 16’ x 8 ‘ heavy duty rack dump body with: 6” channel under rail, 5” channel outer rails, 3” cross-members @ 12” centers, 3/16” smooth steel floor, 42” high racks on sides and rear, VC628 VENCO hoist, 10-15 ton capacity.
15 yard heavy duty dump body with air operated PTO and tailgate, asphalt chutes, track for top boards, low loader, ¼ cab protector, 35 ton pintle hook, 7 way plug, glad handles air controller. Telescopic cylinder lift.
12’x 8’ contractor dump body with a palfinger crane. Direct mount PTO-PUMP drive, VC628, 8-12 ton capacity VENCO hoist.
12’ x 8’ custom pre fab dump body with salt spreader and Western Snow plow kit, Direct mount PTO-PUMP driver. Tool boxes and work lights.
VP6R and VC6R are heavy duty high capacity pickup hoists. These hoists are custom designed to fit your 1989-1998 Ford and 1988-2000 Chevy/GMC "old style" C/K 8-foot box pickup truck. Offered in VP (for original equipment pickup box) and VC (for contractor box) configurations.
16’ ladder rack over cab with utility body with front bumper support and baskets on sides. Removable rear cross bar.
Side mounted ladder racks with heavy duty steel 2’ x 2’ square tubes over 3’’x 2’’x 3/16 steel angle
Landscaper trailer with adjustable ladder rack.
Heavy duty all purpose rack over a 12’ rack body, removable rear cross bar with safety pin.
Truck mounted forklift on tandem axle with a 22’ long flat bed, heavy duty chain holders, easy pre made mounting kit to fit trailers or straight trucks.
Waltco , ACL aluminum rail gate on a van body,2,000 lbs capacity, - All-aluminum liftgate offers large platform load area for medium-duty applications.
Tuck away liftgate on a rack body. Platform stores under truck body at rear of vehicle. It can be installed in flat beds, van bodies at customers specifications in different brands and models.(Waltco, Maxon,Thieman, etc.) and also comes with options like Lights, bumpers, steps, cut off switch, etc.
Conventional liftgate. Platform stores in vertical position at rear of vehicle body, could be installed in flat beds and van bodies. With different specs at customers requirements, power up, power down and gravity down, etc.
Special purpose rail gate used for bottled gas trucks, food, grocery distribution, etc.installed in straight trucks or trailers, key features power up, power down, could de installed in different brands like, Ultron, Thieman, Maxon, etc.
TOMMY GATE The G2 is a heavy-duty dual cylinder design liftgate which fits most full-size (late model and earlier) pickup truck applications. Lifting Capacity - 500, 1000 and 1300
For applications that require both a dump-through tail gate and a liftgate, the Lift N Dump liftgate models offer the opportunity to have both in one package. Lifting Capacity - 1000, 1300 and 1600 lbs.
Waltco’s WDL series rail type liftgate Offers extra advantage for your delivery solutions. 3500LB, 4500LB, 5500LB, and 6600LBN.
Single wheel 108” x 42.5 “ high x 16” deep compartments. 48.5 wide floor. All Galvan Neal steel construction is standard. But with options in stainless steel or aluminum.
SB 130 for 84” CA, dual wheel 130” long x 42.5”high x 20” deep compartment, 51.5” or 53.5” wide floor. Additional options at customers requirements.
Combo unit with a 12ft c custom made dump body with a aluminum B pack tool box with attachment under . !0’ fisher snow plow kit, 20 ton trailer hitch with electric brake and 6 way plug. Manual roll up tarp.
Custom made 14” ft dump body 12” solid high side with wood rail up to 48” high sides, aluminum I pack from buyers product. Venco VC516 hoist 5-8 ton capacity wit direct mount pump and PTO .
Dually wheel 108” x 42.5 “ high x 16” deep compartments. 48.5 wide floor. All Galvan Neal steel construction is standard. But with options in stainless steel or aluminum. Venturo ET18KX crane in rear
Custom made combo landscaper dump body and solid platform in front. 48’ high solid sides swing out barn style door in rear .
2000 peterbil with 22.5 ft RC HD custom made flatbed. Piggy Back mount kit in rear.
2005 Ford F350 Super Duty with RC custom made special flat bed, gooseneck hitch, and Snowplow V model Snow dog.
12 FT RC custom made landscaper body with panels for signs on sides and rear.
16 Ft CONE BODY, apitong wood floor.
14FT Heavy Duty RC Custom made landscaper/ contractor dump body
24 ft Heavy Duty RC Custom made platform bed with Navigator forklift mount on rear.
16 FT Magnum Aluminum flatbed extruded material.
16 FT Heavy Duty RC custom made Gas bottle Body with 3,000 lbs Waltco Railgate.
15 FT X 8FT X 60" H RC Custom Landscaper contractor dump body, PTO operated and manual roll-up tarp.
16 FT dump bed conversion with new sides and doors.
24 FT Heavy Duty RC Custom made platform bed with Waltco tuck away lift-gate
12 FT Heavy Duty RC Custom made flat dump bed
22 FT Heavy Duty HR-400 steel RC custom made dump platform bed, with HIAB 322EP-5 HIPRO KNUCKLE BOOM CRANE.
16 FT FULL HD LADDER RACK, WITH FRONT BUMPER SUPPORT.
2014 INTERNATIONAL WITH 24 FT HD FLATBED AND UNIVERSAL FORKLIFT MOUNTING KIT IN REAR.
12 FT FLAT DUMP BED WITH CAB SHIELD AND 48" X18"X18" UNDER BODY TOOL BOX
NATIONAL KNUCKLE BOOM AND SWAP LOADER SL400 HOOK LIFT.
8 FT FULL STAINLESS STEEL DUMP BODY AND HD 12V 12,000 LBS ELECTRIC WINCH ON FRONT BUMPER
12 FT RC CUSTOM MADE HD FLAT BED WITH TOP MOUNT TOOL BOXES AND SPECIAL TAIL GATE IN REAR.
SWAP LOADER HOOK LIFT SL 400 ON A TANDEM TRUCK.
SWAP LOADER HOOK LIFT SL 180 ON A SINGLE AXLE TRUCK COMPLETE WITH ELECTRIC AUTOMATIC STATIONARY TARP SYSTEM.
14 FT X8FT X 60" H HEAVY DUTY RC CUSTOM MADE DUMP BODY WITH 96"X 24" X54" H RC I PACK.
HIAB XS 144 CRANE, RADIO REMOTE CONTROLLED WITH 20.6 FT HD FLAT BED.
18FT HAVC BOX BODY WITH 84" HIGH SIDES AND PALFINGER ILK-22 LIFT GATE 90"X60" STEEL PLATFORM,
18FT HD RC CUSTOM MADE CLEAN UP DUMP BODY WITH TOP TOOL BOX.
     
80 Crossways East. BOHEMIA, NY 11716
E-mail: info@rctruckequipment.com TEL 631-218-2400 FAX 631-218-7936
2015 @ Feelpcs.com